3d aeroplane engine images.

Hi…..friends here i will show how create a stock vector illustration 3d aeroplane engine images.
In this tutorial you will learn how to create a aeroplane engine quick and easy. 

[1]-Create Chamfer cyl with the following size
    Apply the taper modifier with the good following amount as shown below

[2]-Your object should look this

[3]-Apply the FFD 3×3x3 and select the control point now drag the control point like me

[4]-Convert the chamfer cyl into the editable poly and select the polygons
    Apply the extrude polygons with the amount of -12.0

[5]-Create tube with the following size and place like me

[6]-Create box with the following size and apply the taper and bend modifier with the good following amount as shown below

[7]-Place the object like me

[8]-Create two chamfer cyl and apply the taper modifier with the good following amount as shown below

[9]-Your object should like this

[

[11]-Now you are done it enjoy the final output as shown below

This entry was posted on Monday, May 31st, 2010 at 2:30 am and is filed under 3D Studio MAX Tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.